Language:
[简体中文]

 0086-18055211309

 info@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amina Zhang
    Phone:0086-18055211309
    FAX:0086-552-3822922
    Mobile:+86 18055211309
    WebSite:www.iotachem.com
    www.siliconeoil.net
    Email:info@siliconeoil.net
    QQ:


  • How to Assess Silicone Oil Heat Resistance for Long-Term Operation

    Assessing silicone oil data for long term heat exposure

    Start with the actual oil temperature, air exposure and continuous run time. Flash point, short-term heat tests and sustainable equipment operating temperature answer different questions. No single figure establishes an oil-change interval or long-term stability.

    IOTA-255A, a modified phenyl silicone oil, can be reviewed as a candidate for high- and low-temperature applications.

    IOTA-255A high-temperature phenyl silicone oil

    Why open baths and closed loops need separate assessment

    An open bath remains exposed to air, so evaporation and oxidation conditions differ from those in a closed loop. For a closed system, also specify expansion space, pressure control and material compatibility. Reduced air contact alone does not establish an upper operating temperature.

    Site conditions

    Information to provide with an inquiry

    Checks after aging

    Open temperature-controlled bath

    Actual oil temperature, exposed surface area, run time and topping-up method

    Mass loss, viscosity, appearance and temperature-control performance

    Closed circulation

    Oil temperature, local heat sources, pressure and contact materials

    Viscosity change, deposits, circulation and seal condition

    Lubrication or thin-film use

    Contact temperature, load, speed and how the film is replenished

    Friction and wear, residue and actual function


    Even at the same equipment setpoint, local oil temperatures near the heat source can differ. If the oil thickens, deposits form or topping-up increases, retain fresh and used samples. Compare viscosity at the same measurement temperature and record when each sample was taken.

    Agree on failure criteria before thermal aging

    1. Specify normal temperature, brief peaks, continuous run time, the medium and contact materials. Distinguish the equipment setpoint from actual oil temperature.

    2. Arrange representative tests that reflect site air exposure and vessel conditions. Record sample quantity, temperature, duration and sampling method.

    3. Agree on acceptable viscosity change, mass loss or functional deviation. Validate on a small equipment scale before discussing maintenance intervals. Do not convert short tests directly into years of service.

    Request selection data for heated service

    Use the existing inquiry channel to provide your company, business email, equipment application, actual oil temperature, open or closed configuration, run time, current oil data and any abnormalities. IOTA Silicone Oil (Anhui) Co., Ltd. provides solutions across the silicone value chain. We can review phenyl and other silicone oil raw-material candidates against available documentation. Current TDS, SDS and test data are subject to actual availability. We do not supply complete formulations or formulation-development services.

    Frequently asked questions

    Q1 Is flash point the continuous operating temperature?

    Flash point is a safety-related property measured by a specified method. It cannot alone establish a long-term operating temperature.

    Q2 Can every phenyl silicone oil be used in a hot circulation loop?

    Check the specific material, equipment and validation conditions. Suitability cannot be assigned to the whole category.

    Q3 Does unchanged viscosity mean the oil has passed?

    Also check mass loss, deposits, compatibility and actual function as relevant to the application.

    Q4 Can a short test predict an oil-change interval?

    Use actual operating and sampling records. Do not extrapolate by a simple time ratio.

    Q5 Can I inquire before all equipment data are available?

    Yes. Submit the conditions you know and identify the unknowns. We can review candidates and missing information first, without declaring a grade suitable at that stage.

    Related product

    IOTA-255A high-temperature phenyl silicone oil — candidate for heated service



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    Iota Silicone Oil welcome your message...

New Products

皖ICP备14007495号

Copyright © 2000-2026 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved