Language:
[简体中文]

 0086-18055211309

 info@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amina Zhang
    Phone:0086-18055211309
    FAX:0086-552-3822922
    Mobile:+86 18055211309
    WebSite:www.iotachem.com
    www.siliconeoil.net
    Email:info@siliconeoil.net
    QQ:


  • How to Check Silicone Emulsion Compatibility Before Switching Suppliers

    Selecting Silicone Emulsions by Ionic Character and Bath Compatibility

    Start with the application and the working bath, then check the emulsion's ionic character. Ionic character describes one aspect of the dispersion system. It does not classify every silicone oil molecule, and “nonionic” alone does not guarantee a stable mixture. Check active ingredients, emulsification system, water quality and operating conditions together.

    IOTA EMUL 360 silicone emulsion

    IOTA EMUL 365 nonionic silicone emulsion

    For industrial lubrication or mould release, these are possible starting points. Their listed applications overlap, but their emulsification systems differ. Do not replace one with the other at the same dose based only on solids content. For textile softening or a cationic bath, screen separately for the specific use. These two products should not simply be treated as cationic softeners.

    Ask separately about the base oil and emulsification system

    What to confirm

    What the supplier data should specify

    Why it matters in trials

    Functional ingredient

    Conventional silicone oil or modified polysiloxane, and the function required

    Release, lubrication, softness and hydrophilicity cannot be assessed from the same solids figure alone

    Ionic character

    Cationic, anionic, nonionic or a combined emulsifier system, confirmed from current data

    Screen compatibility with existing auxiliaries, water and salts

    Active content and solids

    Separate definitions and concentrations as supplied

    Nonvolatile content may include emulsifiers and is not automatically the effective base-oil dose

    Site conditions

    Water quality, pH, temperature, addition order, agitation and holding time

    Reproduce these in small trials to interpret differences on the line


    The EMUL 360 product page states that it uses nonionic and anionic emulsifiers and is weakly anionic overall. EMUL 365 is labelled nonionic. Those descriptions differ, but suitability for an existing bath still requires checking the other ingredients and the dilution process.

    For cationic applications share the ingredients already in the bath

    Adding a cationic emulsion to a system containing anionic finishing agents risks flocculation. Tell the supplier the auxiliary names, working concentrations, pH and water quality first. Nonionic candidates also need mixing trials: temperature, salts and shear may still affect stability. Without matching data, do not assume that any cationic emulsion will work.

    1. Retain the current bath and a control without the new material. Run separate small tests with the dilution water and candidate emulsion. Follow an addition order permitted by the supplier data and record flocs, oil separation, settling and viscosity changes.

    2. Recheck at the actual temperature and planned holding time, then test representative parts or fabrics. A stable appearance allows application trials to proceed; it does not replace acceptance of release performance or fabric handle.

    3. When switching sources, record batch numbers, the basis for active content and the process. Specify the required function and tolerances on the purchase order. “Silicone emulsion, X% solids” is not a complete specification.

    Requesting emulsion selection data

    Use the existing inquiry channel and include your company, business email, specific application, current product or bath composition and the issue you want to improve. If ionic character is unknown, send the label or technical data first. IOTA Silicone Oil (Anhui) Co., Ltd. provides solutions across the silicone value chain. We check available candidates and existing documents before discussing sample specifications. We do not provide complete formulations or formulation development services.

    Frequently asked questions

    Q1 Can a nonionic emulsion mix with any bath?

    The label does not guarantee it. Test with the current bath, water, temperature and holding conditions.

    Q2 Can a weakly anionic emulsion replace a nonionic product?

    Select by the actual ionic character and compatibility of the supplied system. “Weakly” is not a reason to skip validation.

    Q3 Does matching solids mean the same effective silicone oil content?

    Check the definitions of solids and active content first. Emulsifiers and other nonvolatile components may count toward solids.

    Q4 Is no flocculation enough to move to production?

    Recheck temperature and holding stability, then verify the actual function on representative parts or fabrics.

    Q5 Can I inquire without knowing my current product's ionic character?

    Yes. Send the label, use, bath composition and symptoms. Check existing data rather than guessing from appearance.

    Related products

    IOTA EMUL 360 silicone emulsion

    A weakly anionic industrial candidate.

    IOTA EMUL 365 nonionic silicone emulsion

    A nonionic comparison option. Screen cationic applications separately by use.



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    Iota Silicone Oil welcome your message...

New Products

皖ICP备14007495号

Copyright © 2000-2026 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved