Language:
[简体中文]

 0086-18055211309

 info@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amina Zhang
    Phone:0086-18055211309
    FAX:0086-552-3822922
    Mobile:+86 18055211309
    WebSite:www.iotachem.com
    www.siliconeoil.net
    Email:info@siliconeoil.net
    QQ:


  • What Does 350 Mean on a Silicone Oil Quote?

    Choosing a viscosity grade for dimethyl silicone oil

    Use nominal viscosity to shortlist grades, then check how readily the oil needs to flow in the equipment at operating temperature. A small mechanism that starts slowly in the morning may move too freely after warming up. Pouring a cup of oil at room temperature will not tell you which grade to choose.

    Start with the application and temperature

    Application

    What to record

    How to compare samples

    Damping mechanism

    Cold-start and normal operating temperatures; stroke and acceptable return time

    Compare cold and warm response times in the actual mechanism

    Fluid circulation

    Minimum start temperature, steady conditions and allowable flow conditions

    Observe flow and equipment load at startup and in steady operation

    Metered coating

    Feed temperature, coating speed and target coat weight

    Compare feeding, coating uniformity and appearance on the same substrate and settings


    The same grade can behave differently in different mechanisms. If a damper is slow, find out whether it is slow only when cold or throughout operation. A lower grade may make warm return too fast. Measure cold and warm response separately rather than assigning one viscosity to every application.

    Reading supplier numbers

    A quote that says “350” needs a unit, test temperature and tolerance. Nominal conditions identify and compare grades. For cold and warm performance, ask for viscosity-temperature data or a measurement at the target temperature. If no curve is available, record the gap and compare samples under your equipment conditions.

    IOTA 201 dimethyl silicone oil

    IOTA Silicone Oil (Anhui) Co., Ltd. provides solutions across the silicone value chain. Send the application, minimum start temperature, steady operating temperature and acceptable equipment performance so we can check candidate grades and available data.

    An inquiry for a damper application

    Tell us what the damper does and its minimum start and normal operating temperatures. If you have the current fluid grade, label or viscosity specification, send it too. If you do not know the viscosity, describe the symptom, such as slow return at cold start or overly fast return after warming up.

    We will check available grades and existing product data. If viscosity data at the operating temperature are unavailable, we can discuss samples for you to compare in the actual equipment at cold start and in steady operation.

    Frequently asked questions

    Q1 Is datasheet viscosity the viscosity inside the equipment?

    It applies to specified measurement conditions. Check data at the operating temperature and run a trial.

    Q2 Can I lower viscosity if cold start is slow?

    Check both cold and warm response, then verify warm return time, leakage and other equipment requirements after the change.

    Q3 Can two quotes that say 350 be compared directly?

    Check the unit, test temperature, material type and tolerance first.

    Q4 How do I select samples without a viscosity-temperature curve?

    Define equipment limits, compare supplier-confirmed candidates cold and warm, and record temperatures and results.

    Q5 Can I switch silicone oil types if viscosity matches?

    Check material identity, contact materials and actual application. Viscosity is one screening criterion.

    Related product

    IOTA 201 dimethyl silicone oil



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    Iota Silicone Oil welcome your message...

New Products

皖ICP备14007495号

Copyright © 2000-2026 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved