Language:
[简体中文]

 0086-18055211309

 info@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amina Zhang
    Phone:0086-18055211309
    FAX:0086-552-3822922
    Mobile:+86 18055211309
    WebSite:www.iotachem.com
    www.siliconeoil.net
    Email:info@siliconeoil.net
    QQ:


  • GC, SEC/GPC or ICP-MS? Choose the Right Test for Silicone Oil

    Choosing laboratory tests for silicone oil

    Start with the question. Consider gas chromatography for D4, D5 and D6, size-exclusion chromatography for polymer molecular weight distribution, and ICP-MS for specified metal elements. Each result answers a different question; none replaces a full composition analysis.

    IOTA LS low-volatility silicone oils

    If buying a low-volatility grade, start with the published information to identify the grade and supply specification.

    Tell the lab what to report

    Target

    Candidate method

    What the report should state

    D4, D5, D6 or other specified low-molecular-weight siloxanes

    GC (gas chromatography; GLC is gas–liquid chromatography), with GC-FID or GC-MS as appropriate

    Results for each target, reference standards, sample preparation and quantitation limits; do not treat unresolved peaks as the total

    Polymer molecular weight and distribution

    SEC/GPC, a liquid chromatographic method that separates molecules by size in solution

    Number-average and weight-average molecular weights, dispersity, calibration standards, detector and whether the values are relative

    Specified metal residues

    ICP-MS (inductively coupled plasma mass spectrometry)

    Elements, preparation, blanks, quantitation limits and recovery; total elemental content generally does not identify chemical form


    HPLC covers a range of liquid chromatographic methods. For molecular weight, specify the SEC/GPC conditions. For a nonvolatile small molecule, have the lab select separation and detection for that target. An ICP-MS result for a metal cannot recover the D5 concentration or identify the compound that supplied that element.

    Define what “total residue” includes and how it is expressed

    If a batch must meet limits for D4, D5 and D6 and you also want to check iron and copper, list all five separately. For total volatile matter, specify time, temperature and the calculation basis separately. Weight loss neither identifies the substances nor converts directly to individual cyclic siloxane concentrations.

    1. Give the grade, lot and whether the sample is an emulsion or contains filler. Specify reporting on an as-received or solids mass basis.

    2. Set acceptance limits and reporting units first. Require a quantitation limit that supports the decision. If the lab reports “not detected,” retain the basis for that result.

    3. When changing lab or method, compare retained samples from the same lot. For viscous or complex samples, check method suitability, spike recovery and blanks before interpreting lot differences.

    IOTA Silicone Oil (Anhui) Co., Ltd. provides solutions across the silicone value chain and can supply raw materials and documentation for the target grade. Testing and acceptance specifications depend on the parties’ agreement and the lab method.

    Frequently asked questions

    Q1 Can GC-MS determine the entire composition of a container of silicone oil?

    No. Define measurable targets first. Routine low-molecular-weight methods do not cover the full polymer distribution or metal residues.

    Q2 Can an HPLC report be used as a molecular weight report?

    Only with a dedicated SEC/GPC method and suitable calibration. A general LC report does not automatically give a distribution.

    Q3 Does finding iron by ICP-MS prove a particular iron compound is present?

    No. Routine elemental analysis reports the amount of iron under the specified preparation conditions, not the compound’s identity.

    Q4 If total volatiles are low, do I still need individual cyclic siloxane tests?

    Yes, if specified in the contract. Total weight loss does not substitute for each concentration.

    Q5 Does “not detected” mean zero?

    No. Keep the detection or reporting limit and check whether it supports acceptance.

    Related resources

    IOTA LS low-volatility silicone oils: product information and batch specifications

    US EPA Method 6020B: a reference for the scope of elemental analysis, not proof it applies directly to neat silicone oil



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    Iota Silicone Oil welcome your message...

New Products

皖ICP备14007495号

Copyright © 2000-2026 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved