Language:
[简体中文]

 0086-18055211309

 info@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Amina Zhang
    Phone:0086-18055211309
    FAX:0086-552-3822922
    Mobile:+86 18055211309
    WebSite:www.iotachem.com
    www.siliconeoil.net
    Email:info@siliconeoil.net
    QQ:


  • Selecting FVMQ for Low-Temperature Fuel Sealing: Tests to Request

    Validating FVMQ Candidates for Fuel Seals at −50°C

    Confirm the fuel first, then assess material changes after immersion separately from low-temperature sealing. Here, −50°C is the customer's target, not a confirmed performance rating for an available grade. A small volume change in a fuel-immersed specimen does not by itself prove that an assembled seal will not leak.

    FVMQ means fluorosilicone rubber, a material category that can be made into elastic seals. Fluorosilicone oil is a liquid; its similar name does not make it a substitute for sealing rubber.

    IOTA fluorosilicone materials category

    Use the category for an initial check of material identity. It includes oils, emulsions and other materials, so its products cannot be assumed suitable for FVMQ seals on that basis.

    What immersion specimens and assembled seal tests each tell you

    Conventional silicone rubber and FVMQ can be compared as material options, but the final choice depends on the actual fuel and finished-part tests. Results for diesel, alcohol-containing fuels and mixed media are not interchangeable. Include cleaning fluids in the validation scope if the seal will contact them.

    Validation stage

    Conditions to specify first

    What to evaluate

    Fuel immersion

    Fuel composition, additives, temperature, duration and specimen recovery conditions

    Changes in volume, mass, hardness, tensile strength and elongation

    Low-temperature material evaluation

    Target temperature, cooling and conditioning sequence, test method

    Low-temperature resilience or recovery, judged by the agreed method

    Finished seal

    Groove, compression, pressure, temperature cycles and medium

    Leakage during cold start, pressure holding and after cycling


    Preparing samples that support a purchasing decision

    1. Provide the seal drawing, static or dynamic application, fuel specification, temperature and pressure ranges. State how long the minimum temperature lasts.

    2. Confirm whether the candidate is supplied as base gum, compound or another form. Agree on specimen vulcanisation and post-treatment. Do not directly compare specimens made under different processing conditions.

    3. Compare baseline properties and immersion behaviour using the same material batch, then test actual finished seals for low-temperature leakage. Record compression conditions, cycles and failure criteria.

    Requesting fuel seal selection data

    Use the existing inquiry channel and submit your company, business email, application, medium, target temperature, dimensions and estimated usage. You may attach reports for the current material. IOTA Silicone Oil (Anhui) Co., Ltd. provides solutions across the silicone value chain. We check raw-material candidates and available data before discussing sample conditions. We do not provide complete formulations or formulation development services, or promise in advance that a finished seal will pass.

    Frequently asked questions

    Q1 Is −50°C a tested property of the current candidate?

    It is the customer's target. A matching grade and a complete supporting report have not yet been established.

    Q2 Can fluorosilicone oil directly replace FVMQ?

    Their supplied states and uses differ. A liquid cannot replace the material for an elastic seal.

    Q3 Is no visible deformation after immersion enough?

    Measure the agreed dimensional and mechanical changes as well, then verify leakage on the finished seal.

    Q4 Can one diesel report cover every fuel?

    No. Check the composition and additives of the actual medium.

    Q5 Can I request samples first?

    Provide the medium, drawing and operating conditions first. After checking candidates, confirm sample specifications, costs and lead time.

    Related materials

    IOTA fluorosilicone materials category



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    Iota Silicone Oil welcome your message...

New Products

皖ICP备14007495号

Copyright © 2000-2026 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved