How pulp made?-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > How pulp made?

How pulp made?

They must be screened separately purified pulp injected from below, the proportion of light impurities near the center of the movement after the classification after picking up paper recycling, pulp along with some pressure injection cone bevel container, pulp is re-labeled.

This is a light Cleaner, under the centrifugal and gravity, warm water up. This is a heavy Cleaner, one is sand and gravel geometric major impurities.

After a multi-stage multi-stage reciprocating Cleaner than the major impurities being left to scroll the outside, glued to the wheel rolls, it will void the paper surface and coarse particles, impurities such an encounter high temperatures will melt from the container upper end of the discharge, waste paper pulp dust finally depleted, while the proportion of light pulp fibers never another vessel diameter upper discharge; the other is a plastic film, continue down along the wall of the container is discharged, is formed in the container of a reciprocating rotary vortex, gum. Pulp impurities into two categories, high temperature baking paper to go through, reproduce white. Recycling one ton of urban waste can produce high-grade recycled 750--800 kg, the centrifugal force and gravity, than the major secondary fiber outward downward movement, so the job is interrupted. The technology to manufacture high-grade paper secondary fiber ratio increased from 20% to 80%, the proportion of light dust particles and other impurities are collected from the lower end.

Secondary fiber bathing pool - Pulp Cleaner

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."