Self-adhesive glue on the selection-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > Self-adhesive glue on the selection

Self-adhesive glue on the selection

Self-adhesive glue on the choice of the requirements can not easily tear tore glassine paper. Thank you, to be affixed is my pet film substrate is a glassine paper (no release), and glassine paper is torn, done under the guidance of trouble. I chose to reduce viscosity glue method, but some time after curing do not tear open

If not on the grid at the end from the type of paper, that unless you are low enough viscosity to just 50 grams or less of some of these possibilities have not been torn glassine paper.
Otherwise, it is best to use a release of the grid at the end there.
Pressure grams Adhesive viscosity low enough to be chosen to only 50 grams or less.
Otherwise, on the selection of PU glue (← usually low viscosity) or silica gel

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."