Curing silicone encapsulants not how to do? Why?-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Ariel Young
Phone:	0086-552-3827158
FAX:	0086-552-3822922
Mobile:	0086-15255290433
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:	sales@siliconeoil.net
QQ:

Service > Curing silicone encapsulants not how to do? Why?

Curing silicone encapsulants not how to do? Why?

The reason there is a problem: the addition of catalyst poisoning or glue expired; curing temperature caused by inadequate or incomplete curing time is not enough.
Cause of the problem might be: because the measuring instrument error or human error factors with plastic proportions; the product exceeds the storage period caused by the failure or near the storage period, performance degradation; due to improper storage catalyst product failure or performance degradation during storage; environment when used in catalyst poisoning element such as phosphorus, sulfur, nitrogen compounds, or simultaneously with the addition of silica gel using a polyurethane, epoxy resin, unsaturated polyester, condensation-type RTV silicone rubber, and other products; curing temperature caused by inadequate or incomplete curing time is not enough.
Solution: measuring instruments must regularly check; system uses double dual group assignment glue; ensure the required storage conditions, manufacturer, and note the storage period, follow the "FIFO" principle when used to ensure the shortest possible period of validity in after use. Workplace away from other potentially harmful organic compounds, using plastic material immediately after smoking. Zhao Shun Technology silicone potting glue good.

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."