The production process of levelling agent for powder coatings-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Ariel Young
Phone:	0086-552-3827158
FAX:	0086-552-3822922
Mobile:	0086-15255290433
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:	sales@siliconeoil.net
QQ:

Service > The production process of levelling agent for powder coatings

The production process of levelling agent for powder coatings

Powder coatings for coupling DN-405

Chemical name bis (diethyl citrate) dipropoxybis zirconium chelate

English name Bis-Citric acid diethyl ester n-propanolate zirconium chelate

CAS No. 22830-18-8

Molecular formula C26H44O16Zr

Structural formula

Molecular Weight 703.8

Physicochemical properties of white or light yellow powdery solid, melting point: at 48 ℃, heating conditions can be dissolved in isopropyl alcohol, toluene, xylene, mineral oil.

Use in the powder coating industry, the product treated inorganic mineral materials such as calcium carbonate, titanium dioxide, barium sulfate, talc, etc., to improve compatibility with the resin, the resin dispersion, rheological properties change . Dense coating, adhesion, impact strength and toughness are improved, good coverage corner.

Other coatings, the product is used in high solids titania / clay, epoxy coatings and solvents can reduce the amount of titanium dioxide, increasing the amount of clay filled, while not changing the viscosity of the system; increased glass, metal adhesion. This product is used for treating metal powder and other inorganic fillers to improve filler dispersion, anti-sinking. Simultaneously with the coating produced with the active groups of the resin bond, giving the coating film a better wear resistance and corrosion

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."