The aqueous ink of the solvent-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Ariel Young
Phone:	0086-552-3827158
FAX:	0086-552-3822922
Mobile:	0086-15255290433
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:	sales@siliconeoil.net
QQ:

Service > The aqueous ink of the solvent

The aqueous ink of the solvent

Water-based ink additives commonly used are the following: 1. defoamers: water-based ink is used to eliminate the bubble, the amount is usually 1% to 2%. 2. Stabilizer: mainly to prevent the ink in the storage, transportation coalescence, mildew, reduce ink viscosity adjusting the pH value of the ink and the general use of ammonia or ethanolamine and other additives. 3. Other additives: dispersants, preservatives, leveling agents, slip agents and crosslinking. Through the use of these additives to improve science aqueous ink weakness, can improve performance and stability of water-based ink. : The water-soluble resin, a pigment, additives and solvent (water) were mixed and dispersed by stirring by the high-speed disperser, grinding paste into standby. The solvent used for an aqueous ink having: ① dissolving the resin, to give ink; ② to adjust the viscosity, to give printability; ③ to adjust the drying rate. A non-toxic water-based ink is also required to have properties, so it is mainly solvent of water and a small amount of pure alcohol, such as water, ethanol, butanol, isopropanol and the like. These solvents may enhance the ability of the auxiliary water to dissolve the resin to improve the pigment dispersion and to accelerate the penetration, to suppress foaming.

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."