What are the characteristics of TPE material silk screen printing ink!-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > What are the characteristics of TPE material silk screen printing ink!

What are the characteristics of TPE material silk screen printing ink!

An ink using a technical reference Scope: all kinds of TPE, TPR, EVA, vinyl elastomers, rubber and other olefin-based elastomer. 1. Thinner: TPE thinner. 2, defoamers and leveling agent: TPE special defoamer and leveling agent. 3, hardening agent: None. 4. The ink formulation methods: Stir before using the ink. Where appropriate, adding 10-30% of a diluent, then stir to use. 5, packing drying conditions: no less than 8 hours. 6. Use the time after adding hardener: None. 7, ink heavy metal content standard: EN71-3 standards. 8, flammable grade: for two flammable liquid. 9, with a solvent toxicity: toxic. Second, the ink usage note 1, try printing to comply with the requirements before mass production. 2, good material to be printed on the surface to remove grease and impurities efforts to promote adhesion effect. 3, if necessary trapping, trapping should be dry or hard work color dry before the former. 4, after the work is completed, the remaining ink tightly closed container sealed. 5 is detected, adhesion, hardness, acid resistance, oil resistance, scouring oil resistance, scratch resistance, abrasion resistance and other properties, only after detecting the need to fully cure ink. 6, without permission case, this series of inks and other types of ink may not mix and match colors. 7, when the printing quality adverse situation, please consult the technical department of the Division, not themselves. 8, improper use without compensation. Third, the results of performance testing ink viscosity Thomas viscometer 5000-8000CPSOK grind fineness dry conditions 10UM ↓ OK OK adhesion natural drying 24 hours (per cell) 1 × 10 × 10MM square 5BOK pencil drawing pencil hardness of China 2BOK impact performance ---- impact instrument does not detect alcohol alcohol resistance does not detect --1 reagent test substrates: TPE sheet. 2, the construction ratio: Ink: thinner = 10: 33, the detection time: can be detected completely dry.

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."