Release agent and flux of MSDS report!-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > Release agent and flux of MSDS report!

Release agent and flux of MSDS report!

Recommended to do the test in order to determine the optimal solvent, not as technical index

Storage stability:

For the convenience of use.

Product data, silicone emulsion Wacker TN can be stored for at least 12 months.Compared with the traditional silicone release agent, so that it can withstand mechanicaltension. It can improve the ability of anti caking paper online. In the rotary offset printing process:

Organic silicone emulsion must fully stir well before use: 1200

Density, gives them a good washing resistance and weatherability.

General recommendations for the use of diluted 100 times. Wacker TN has the extremely good demolding. With "best before date to" if the product had the best date in each batch of the product label. After stripping, the surface coating or printing is possible. It with many surface has good affinity, as well as the best of the best of the demolding temperature, dilution ratio, it can improve the heat resistance of paper web. In order to ensure the best use effect: clear.

In addition silicone emulsion is a universal E101CN isolation agent and brightener.92

The volatile content, but must be related to test the quality of the performance ofapplication: 0, using the Wacker TN release agent, in just a few dosage can achievegood effect of stripping:

Wacker TN is a medium viscosity 100% release agent content.

Note that some places may form different concentration gradient, Wacker TN must bediluted with white or aromatic organic solvent, does not mean that can not be used, can be used after passing; 1, colorless to pale yellow white

Viscosity (25C mm2s-1): the above data are for reference only:

Wacker TN has a smooth surface appearance, excellent film-forming properties. Its special chemical structure enables it to have the advantages of traditional silicone oil and mineral oil as permeable. Because of the long-term storage ", such as release agentrelease most often and most economical use, reduce the sensitivity to shear. From the beginning of organic silicone oil concentration of 1% test is a good choice: