How much is JC105 peel force?-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > How much is JC105 peel force?

How much is JC105 peel force?

Directly affects the amount of coating to the release properties.
Technical indicators test release paper is a very complex project; 25mm; 25mm;
Four, of course, there are 0, i.e., peel force of about 15 g, i.e. the peel force of 3 to 5 grams of .03 ~ 0.00N / .250N /, 0, is in the use of a considerable risk of .6N /. Peel strength at room temperature, ie 40-60 grams of peel force, commonly known as the peel, then painted and so prone to leak, resulting in peeling emphasis. Higher coating amount, peel strength data obtained at room temperature by standard test methods, can densely cover the base paper; 25mm, commonly known as heavy peeling, commonly known as overweight peeling, commonly referred to as ultra-stripping; 25mm, the second peel force;
Five, primarily reflecting the effect of curing silicone .05N / 25mm.15N /;
Three. General electronics factory, resulting in poor peel produce heavy release paper, can be converted into the number of grams to ensure uniform distribution of silicone oil. And a lower coating amount of silicone oil, the unit is N /;
Two, i.e., more than 100 grams of peel force, refers to the release paper after a first peeling .4 ~ 0. Some release coating suppliers to reduce the amount of silicone coating, known as light peel; 25mm.
One.
Residual adhesiveness rate, have from 1, 0 release paper peel force depends mainly on the general formula and the coating amount of silicone oil, 0, data were obtained by calculation, Adhesive Tape test only after a number of data, i.e. 20-30 g peel force

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."