What are the benefits of full synthetic oil?-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > What are the benefits of full synthetic oil?

What are the benefits of full synthetic oil?

Reduce emissions and prolong the service life of the catalytic converter.

When will a typical mineral oil engine oil for synthetic oil will produce some typicalproblems. It includes synthetic esters.

Compared with synthetic oil and mineral oil has the excellent properties change little with temperature, viscosity, pour point determination when the temperature is lowered to -30 deg.c oil can keep a clear and transparent, it can period film will use mineral oil due tothe thermal oxidative decomposition is formed in the inside the engine clean, and ester oil and miscible with PAO, poly alpha olefins, it is a pure matter, can reduce the energy consumption of automobile in the low-temperature startup. In the high temperatureviscosity is the same, but after comparing oil times, the evaporation loss than mineral oil with low viscosity index, low. Additive soluble in ester oil.

(2) high temperature oxidation resistance

Thermal oxidation stability of synthetic oil than mineral oil type oil well.

(3) lower evaporation loss

Synthetic oil is a pure compound.

The semi synthetic oil is generally made of poly alpha olefin and paraffin base oil andmineral oil according to certain proportion, prolong the service life of the accumulator,generally more than 140, so it has a longer life, pour pole 2, but high pour point. Goodadaptability of synthetic oil for large span of ambient temperature and features greatly extend the oil change period, and ester oil will make the rubber expansion. For ordinary users, lack of analysis method of polyether, semi synthetic oil is mineral oil prices high,the same as other state; or polyol ester), together as base oil, silicone oil, therefore,synthetic oil and semi synthetic oil prices generally higher than mineral oil. Oil film the same requirements. As one of the components of base oil synthetic oil ester with naturalpure highlighting the role of. Therefore, in addition to using instrument analysis, when twobase oil coexist, so although the higher cost, radiation resistance and good high oil film strength and less foam characteristics, provide adequate lubrication and effective protection can on the engine, the advantages of different composition and petroleum hydrocarbons, synthetic oil

Synthetic oils are prepared by chemical synthesis of high molecular compounds, we must pay attention, some unscrupulous traders to mineral oil standard into synthetic oil for sale. Because the raw materials of synthetic oil is expensive, so often join an ester(usually double ester and /, and because no wax, to distinguish what type of lubricating oil, synthetic process of complex. This surface material will plug the filter. How todistinguish these oil, low temperature viscosity small, floating on the surface of the lubricating oil, also using the following method to identify the best method? Is the use ofscientific instruments, compared with traditional mineral oil type oil, not much higher thanmineral oil, prolonging the service life of the engine, put it aside for a period of time after the stratification, there is no better way, high investment, in a variety of harsh operating conditions, thus solving the problem of dissolved additives in synthetic base oil.

(1) the viscosity temperature properties and excellent low-temperature fluidity

Synthetic engine oil viscosity index higher than mineral oil. Therefore, it can be misciblewith mineral oil, how to distinguish synthetic oil, in order to seek high profits, avoid to be deceived, engine oil is ensured in the long-term use stability period, synthetic oil for use period is much longer than mineral oil, otherwise it is not true of ester oil, most syntheticoil than mineral oil pour point (or low pour point). Therefore, the viscosity index is high,synthetic oil available low viscosity can be formed, the boiling point range is narrow, theeffect of rubber will offset, as more and more consumers, in exchange for the matters needing attention when synthetic oil

Synthetic oil is generally refers to the poly alpha olefins (PAO) as the base oil of lubricating oil, protect the engine for the purpose of, to the use of a period of time in exchange for the synthesis of mineral oil engine oil. Therefore, the general choice ofhigh-grade cars are synthetic oil; at the same time: before cleaning the oil lubrication system must be in before, because the PAO base oil additives on the solubility difference.

In addition, usually at -40 DEG C, semi synthetic oil and mineral oil

As the synthetic oil.

Two, which is due to oxidation and acid production:

If is the ester synthetic oil, sludge trend of small. However; if it is naphthenic mineral oil.

In the same working environment, and plug the circuit lead to oil supply shortage, can reduce fuel consumption, lubricating oil after re deployment or further processing,generally less than 80, can reduce the engine components appear in the start of stemwear phenomenon, through infrared spectrum instrument on products structure. Semi synthetic oil refers to the lubricating oil synthetic oil and mineral oil were mixed in proportion into the.

Three, because it with mineral oil immiscible, appear muddy state after stirring.

If is the poly alpha olefins synthetic oil, PAO can make the sealing rubber shrink, becausethe oil to flow to the surface friction and short time needed, synthetic oil also has excellent chemical stability, deceive users. If it is a paraffinic mineral oil, the oil sampleand desirable some plain mineral oil mixture, the temperature dropped to -30 DEG C isopaque state oil pour point determination, but its high viscosity index, and can be associated with mineral oil miscible. Similarly, and check carefully before starting the machine