Which cause the deformation of silicone rubber-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > Which cause the deformation of silicone rubber

Which cause the deformation of silicone rubber

What are the causes of the deformation of silicone rubber, we all know that the probability of a large deformation of silicone rubber, once the deformation of its use value greatly reduced, silicone rubber deformation is a reason, but with the use of maintenance has a direct relationship. So what are the reasons for the deformation of the silicon banana?
Causes of silicone rubber deformation of the main reasons are three points, respectively, the aging of the maintenance, the content of silicone oil and maintenance is not normal is more common, the following is to do a detailed analysis, for everyone to do the knowledge reference.
What are the main reasons for the deformation of silicone rubber products are as follows:
1, the maintenance of aging
That is, silicone rubber is not maintenance and aging phenomenon, such as silicone rubber is prone to deformation, silicone rubber if not complete aging maintenance, not only deformation, and its service life and quality will appear a large decline.
2, the content of silicone oil
The content of silicone oil is directly determine the quality of silicone rubber, if the content of silicone oil in the processing stage is too much, it will lead to high viscosity of silicone oil, and if it is to reduce the oil content, it will lead to poor quality of silica gel. Therefore, the content of silicone oil directly determines whether the silicon rubber is easy to deformation, is the quality of the reasons.
Reminder: silicone oil in the "50%".
3, silicone rubber maintenance is not normal
Silicone rubber need maintenance to prevent deformation, but the maintenance is not easy to lead to deformation, which is how the maintenance process, especially in the aging process, if the silicone rubber abrasive is not correct, the abrasive will need to be fixed with the external or internal abrasive tools, so that it can prevent the deformation in the aging process.
Which causes the deformation of silicone rubber products, these reasons are common causes of silicone rubber deformation, silicone rubber general maintenance is good, the correct use is not easy deformation, so that the use of attention to detail, pay attention to maintenance can avoid silicone rubber deformation.

分享到

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."