Wire and cable release agent-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > Wire and cable release agent

Wire and cable release agent

[Characteristics]

This product is a high molecular organic materials by emulsion polymerization and compounded. Its characteristics: oxidation resistance, no corrosion, not easy to volatile,high surface activity and physiological inertia. The wire through the product after impregnation can automatically cross-linked film on the wire surface, as can enhance theacid and alkali corrosion resistance, anti cracking, add a protective coating elasticity and smoothness, and due to its high temperature resistance and on the surface of cable by burning fuel to generate a non-conductive silica dust, improving wire heat resistance andinsulation, so that the wire to extend the service life. This product can replace the talcum powder rubber vulcanization of isolation from the anti adhesive effect on rubber cable, so that the isolation drum, removing cylinder sticking prevention, more convenient. But look bright, beautiful, smooth, non-toxic, clean environment, to avoid the dust on workers'physical injury, make the operation condition is greatly improved.

[technology] index

Appearance: milky white liquid, no mechanical impurity

PH value: 6.5 ~ 8

Stability: 3000n/min, 15min are not hierarchical.

This product is non-toxic, non corrosive, non dangerous goods not burning

[method of use and dosage]

The light isolating agent can be used for dipping and spraying method.

Impregnation method and reference dosage.

The use should be preceded and components according to different amount of gluecontaining rubber thread, wire diameter size of the small-scale test, to determine theapplicability and application technology of cable. Wire and cable special release agentproportion amount was diluted with 1 - 2 times water (depending on the object and decide), or after the first water tank cooling, and then the raw liquid tank dipping. When in use, the working tank temperature should not be higher than 35 DEG C, suggested that every day add solution, such as working liquid tank floating oil or release agent anti sticking effect becomes worse when, should be re formulated, or affect the appearance of the cable and release effect.