How to maintain the solid wood furniture?-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > How to maintain the solid wood furniture?

How to maintain the solid wood furniture?

Every day of solid wood furniture the appearance of dust, dust removal time can first useclean soft cloth dipped in a neutral detergent or furniture special cleaning agent to remove, and then do a comparison of soft cotton cloth carefully wipe on the surface, to ensure that the surface is smooth, dry. And, in daily life should avoid highly corrosive chemicals and furniture surface contact, also should try to avoid the corrosion of oil fume on solid wood furniture.

1 wax

Waxing can not only make furniture more beautiful, also can greatly prolong the service life of solid wood furniture. Solid wood furniture should be regularly waxing, about every 5 months for furniture paste wax for the furniture with a layer of wax. While in the soapy water before waxing, mild non alkaline application will erase the old wax. For the polishwax on the choice of proposal do not contain silicone resin, silicone resin not onlybecause will soften and destroy the surface will be blocked pores to wood, repair to great inconvenience.

The 2 ward of drying

Winter air humidity relatively small, relatively dry interior, maintenance of furniture only bywet wiping make-up water is not enough, should also be through furniture care professional essential oils to maintain moisture. Furniture nursing essential oil containseasily wood fibers absorb natural orange oil, can effectively lock the moisture in the woodto prevent cracking deformation, also nourish wood, let wood replay from inside to outside, prolong the service life of furniture.

3 remember that the best indoor humidification heating

Solid wood furniture need a moist environment, but also to avoid the sun on the long timeirradiation of the whole or part of the furniture. If long time in high temperature baking,easy to make limited parch and split wood, warping, distortion or even partial changes, so the furniture placement it is best to avoid sun exposure, or with a transparent chiffoncurtain separated from direct sunlight, which does not affect the indoor lighting, but alsocan protect indoor furniture. But attention is required, furniture should not be placed in damp places, because the wood wet easy expansion, a long time will cause deformation,decay.

4 avoid direct contact with the humidifier

Wooden furniture insulation to anti cracking, but must pay attention not to let thehumidifier directly into the wooden furniture, or a long time away from the heater too close, it will make the local be affected with damp wood furniture caused by moldy,expansion problems. And don't be wood furniture place in direct sunlight, this will cause premature local film fade or wood aging deformation, so for wooden furniture, relativelycool, ventilated place is the best choice.