Silicone oil paper process-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > Silicone oil paper process

Silicone oil paper process

The use of solvent based silicone oil accounted for the overall silicone release papermarket more than 60%, but due to the recent oil price fluctuate rising in the solvent costs,many enterprises begin to turn to the solvent free silicone oil. Solvent based siliconecoating cost is the lowest, for example, oil of K-50 glue, dry glue 60 grams, coatingsolvent dry silicon coating weight 0.80 grams per square meter, if the use of non solvent type dry silicon coating weight must be 1.30 grams per square meter. Many from the type of coating supplier because of equipment limitations, in order to decrease the coatingcost, have to the solvent free silicone oil adding solvent to reduce the silicone content, to reduce the amount of coating, the risk is considerable. And solvent-free silicone oil is not suitable for oil gel.

Because silicone oil required in a certain temperature to a volatile solvent and curing, souse at present most is heat curing silicone oil. Of course, there are many domesticmanufacturers have been used for UV curing, is mainly used in thin film coating. Becausethe curing temperature film cannot be tolerated, are usually used for curing method of UV curing the relative cost expensive, both equipment investment, or processing cost. UV curing is heat cured to one to two times.

From the release agent mainly silicone release agent is the main type of paper, deputy toorganic fluoride release agent and some other non silicone release agent.

Silicone release paper can contact glue for hot sol, oiliness acrylic pressure sensitive adhesive (commonly known as: oil glue), emulsion type acrylic pressure-sensitive adhesive (commonly known as: water gel).

The fluorine release paper contact silicone pressure sensitive adhesive (commonly known as: silica gel).

Silicone release agent, can be divided into solvent and non solvent type two or by thecuring method is divided into heat curing silicone oil and silicone oil UV curing andelectron beam curing silicone paper. Electron beam curing has been producing leatherrelease paper manufacturers use, it is reported that home is a foreign factory has theequipment.