Do you know how much peel force release paper-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > Do you know how much peel force release paper

Do you know how much peel force release paper

The peel force depends on the number of silicone release paper and the coating amount of the formulation, a direct impact on the amount of coating peeling performance. Higher coating amount, it is possible to densely cover the base paper, to ensure uniform distribution of the silicone oil. The lower the amount of silicone coating, the coating is prone to leakage and other phenomena, resulting in eliminating bad. Some vendors release coating to reduce the coating amount of the silicone oil, resulting in peeling emphasis to produce a heavy release paper, the use of a considerable risk. Room temperature peel strength, peel strength data obtained at room temperature by standard test methods, the unit is N / 25mm, can be converted into the number of grams.

First, the general 0.15N / 25mm, or 15 grams of peel force, known as light peel;

Two, 0.250N / 25mm, ie 20-30 grams of peel force, known as the peel;

Three, 0.4 ~ 0.6N / 25mm, peel force that is 40-60 grams, commonly known as the most important release;

Fourth, of course, there are 0.03 ~ 0.05N / 25mm, namely the peel force of 3 to 5 grams, commonly known as ultra-stripping;

Fifth, there are 1.00N / 25mm, that is more than 100 grams of peel force, known as overweight peel.

Residual adhesion rate means that the release paper peeled off after a first, a second peeling strength, calculated by the data obtained reflects mainly the effect of the cured silicone.

Technical indicators test release paper is a very complicated project. General Electronics Factory, Adhesive Tape data only after several tests.

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."