Language:
[简体中文]

 0086-552-19805521900

 sales07@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
    Contact:Nathan Zhang
    Phone:0086-552-19805521900
    FAX:0086-552-3822922
    Mobile:19805521900/18119733779
    WebSite:www.siliconeoil.cn
    www.siliconeoil.net
    Email:sales07@siliconeoil.net
    QQ:729118868

  • Epoxy-modified silicone resin IOTA-H-30

    Epoxy-modified silicone resin IOTA H-30

    Characteristics and application:

    This product has a relatively excellent resistance to high and low temperature, hydrophobic moisture resistance and good electrical insulation properties, arc resistance corona performance. Its weather resistance and chemical stability, corrosion resistance is also very good.

    This product is widely used as high-temperature anti-corrosion coatings (≥500℃) , can be completely cured two-component at room temperature, the property will be better after roast solidification. It could also be used as H grade insulating material.

    Data:

    Appearance: Light yellow transparent liquid, allowing opalescence, no mechanical impurities

    Solid content: 50±1%

    Viscosity: 20-60 seconds (No 4 cup)

    epoxy value: 0.02~0.07

    Uses:

    A: two components solid at room temperature. Could be used with 650 polyamide or T-31. The 650 adding amount is about 10~15% of the resin total amount. The T-31 adding amount is about 5~7%of the resin total amount.

    B: Oven curing at high temperature, it fully solidified after 1.5 hour at 180~200℃.

    Notes:

    a. The diluting solvent used in this product should not contains water, pyridine sulfur-containing compounds and impurities, otherwise it will affect the resin film adhesion, dry and other properties.

    b. There will be a lot of xylene and other flammable, toxic solvents evaporate during the production process, we should pay special attention to strengthening the field of ventilation, attention to fire safety, strict cut off the source of fire. The operator should pay attention to labor protection.

    c. The processing equipment, utensils must be clean during the production process. To prevent dust、foreign matter and water.

    d. The products such as acid、alkali、salt of organic acid amine compounds has Accelerate the solidification effectiveness for this product, and will influence the heat resistance and electrical properties. So, this product should be isolated with those products when storing.

    Storage: This product should be stored in ventilated, cool, dry place to prevent direct sunlight exposure; to prevent serious pollution of acid, lye, and should be cut off from sources of ignition away from heat, the product storage period is six months.

    Packing: 25kg white iron drum, 200kg white iron drum  



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • *Name:
    *Contacts:
    *Content:
    *Code:    验证码

    Iota Silicone Oil welcome your message...

New Products

皖ICP备14007495号

Copyright © 2000-2024 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved