Language:
[简体中文]

0086-552-3827158

sales@siliconeoil.net

Products

News

Contact Us

    Office     Address:Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
    Factory   Address:Century Avenue, Industry Park of Huaiyuan, Bengbu, Anhui, China
    Contact:Allen Wang
    Phone:0086-552-3827158
    FAX:0086-552-3822922
    Mobile:15605528186
    WebSite:www.siliconeoil.cn
    www.siliconeoil.net
    Email:sales@siliconeoil.net
    QQ:2509235466

  • IOTA 995 Silicone Sealant For Total Vision System

    IOTA 995 Silicone Sealant For Total Vision System

    1. One part, fast cure

    2. Outstanding weatherability

    3. Excellent resistance to temperature extremes, virtually unaffected performance from –50 ℃ to +150 ℃

    4. Good compatibility with other neutral silicone sealants

     

    COLOURS

    ITOA 995 is available in translucent.

     

    PACKAGING

    IOTA 995 is available in cartridges (net 300ml).

     

    SPECIFICATIONS

    IOTA 995 complies with ASTM C 1184-05.

     

    Typical properties

    These values are not intended for use in preparing specifications

    Test Method

    Property

    Unit

    Standard

    Result  

    ASTM C 639

    Slump

    mm

    ≤4.8

    0

    ASTM C 603

    Extrusion rate

    s

    ≤10

    1.9

    ASTM C 679

    Tack free time

    h

    ≤3

    0.4

    ASTM C 661 66153113477

    Hardness

    Shore A

    2060

    32

    ASTM C 1135

    Tensile strength

    MPa

    ≥0.345

    0.45

    ASTM C 792

    Heat aging 

     

    Qualified

     

     

    chalking

     

    Nil

    Nil

     

    cracking

     

    Nil

    Nil

     *ASTM: American Society for Testing and Materials

     

    STORAGE AND SHELF LIFE

    IOTA 995 should be stored at or below 27℃ in original unopened containers. It has a shelf life of 12 months from the date of manufacture.

     

    LIMITATIONS

    IOTA 995 should not be applied:

    To 4-sided and 2-sided curtain walls;

    To the materials that bleed oils, plasticizers or solvents, such as impregnated wood, oil-based

    Caulks;

    In totally confined spaces as sealant requires atmospheric moisture for cure;

    To frost laden or damp surfaces;

    For continuous water immersion;

    When surface temperature below 4℃ or over 50℃;

    For metal coated glass glazing.

     

    HOW TO USE

    Surface Preparation

    Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

     

    Application Method

    Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required for non-porous surfaces, but may be necessary for optimal seal performance of certain porous surfaces. So adhesion testing is always recommended.

    Apply IOTA 995 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled. 



Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."

  • Name:     *Required
    Contacts:     *Required
    Content:     *Required

    Iota Silicone Oil welcome your message...

New Products

Copyright © 2000-2014 Iota Silicone Oil (Anhui) Co., Ltd, All Rights Reserved