Release paper uses, classification and characteristics-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > Release paper uses, classification and characteristics

Release paper uses, classification and characteristics

Use

(1) Glassine (bottom of glassine paper) silicone paper: high temperature, moisture, oil, generally used in food industry packaging.

(2) General release paper: moisture, oil, play a role in isolation of the product.

Applicable industries: electronics, automotive foam, printing, etc., most of its range and has a viscosity of special together, especially tape Therefore, the general use of the product will be used to tape release paper.

Classification

(1) by color:

A white single silicon release paper, referring to one side is a prime paper, one side is a silicone oil. More commonly used.

B single silicon yellow (blue) release paper, refers to two surfaces are yellow (blue) of the release liner.

(2) Press Weight: ranging from 35-250 grams (can be higher).

(3): plus silicone oil can be classified according to whether silicone paper, and coated paper.

Note: coated paper is only the end of paper and lamination, if it is silicone paper refers to three kinds of paper are.

(4), according to the single-sided points.

A, double silicon single letters, referring to one side is the oil, only one side lamination, the kind on cleanliness will be increased.

B, double silicon, means both sides are silicone oil.

C, single silicon.

D, coated paper, also known as the white plastic paper.

(5): by product material producer.

A: Domestic.

B: imports.
Features

1 cleanliness. Refers to the surface clean and cleanliness since the release paper factory production environment is different, most of it is not a clean studio, because of cost, it is impossible to adopt clean studio, general who are ordinary plant, a little better would have a lot of improvements in environmental protection and environmental aspects, which will have an impact on cleanliness.

2 from the type of degree, refers to the release paper from the type of degree, at this point there is no absolute values, see different recipes each manufacturer to decide.

3 peel strength, peel strength refers to when the product tear drop, is it easy, of course, there are strict testing standards.

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."