What is the release paper?-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > What is the release paper?

What is the release paper?

Also known as release paper, release paper. Is a prepreg prevent adhesions, but also can protect prepreg from pollution release paper.

When wet production prepreg, prepreg were in place up and down the release paper, which along with the next release paper winding prepreg deposit attached them, so prepreg surface is usually protected by a layer of release paper. Role is to prevent the release paper prepreg is contaminated, but also for the convenience of its surface crossed. Another effect of preventing the release paper is a transverse crack unidirectional prepreg. Release paper should be met: the prepreg can stick, but is liable to separate them; resin system or contamination of the chemical reaction does not occur with the resin system; at ambient temperature and humidity changes, the length of the release paper, the width should be remain unchanged, in order to avoid leaving the release paper to wrinkle creases prepreg; should be sufficiently dense, it is possible to prevent moisture entering through the prepreg; elongation after its release liner and the fiber to be subject to traction consistency, in order to prevent the prepreg during preparation due to the drawing does not cause deformation or distortion of synchronization; its thickness, mass per unit area is not easy to precisely control. Of paper coated with a release paper from the release material, the model according to the material, thickness, elongation, single-sided difference and distinction.

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."