Common problems of silicone patch silicone oil used in clothing washing-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

Service > Common problems of silicone patch silicone oil used in clothing washing

Common problems of silicone patch silicone oil used in clothing washing

Silicon spot in the visual representation of the clothing surface grease spots ranging from the tip to the grain size, the area under the extreme conditions may be bigger, sometimes because the floating color caused by oil stains on a certain color, the spots like a little wet, soft feel no sense of particles, before drying is extremely difficult to find, very difficult to removal. The reason is the floating oil demulsification silicone oil leads to, often appear too soft in the process of finishing and washing.
Preparation of DP drops, in order to reduce the influence of the resin finishing, often choose to join higher brightness, sliding and tear strength of silicone oil, amino silicone oil and gigantic hydroxyl silicone oil and compound silicone softener, now also began to application of multicomponent copolymerized silicone oil. Application in addition to the selection of appropriate silicone oil, be sure to follow the correct ingredients dilution process and after the configuration to 1-2 hours after the re-use, use before check the potion surface floats and stratified, bubble dress process to check the potion state changes, is recommended to use bubble medicine or spraying machine. Floating oil demulsification phenomenon in addition to silicone oil structure, cation, emulsification and reason, mainly is the reasons of anion exchange resin, strong catalyst electrolyte, water hardness and garment fabrics such as the pH value and other interfering medicine left, due to high temperature setting reason, after the completion of the wash and wear process found silicon spot problems at present there is no good way to eradicate, mainly rely on pre inspection and process in the strict implementation of the.
Washed soft, due to the process environment, the washing process of yeast BiP washing process less, general cleaning for desizing often use alkali, alkali removal was not sufficient directly added soft easy problems, other process if the soft of color, bleaching, fry flowers, fried bleaching etc. craft, or the use of strong electrolytes sodium sulfate, salt and promote dyed solid color or soda ash, caustic soda, phosphate, or the use of strong oxidizing agents such as high manganese with phosphoric acid, hydrogen peroxide, bleaching water, or because of pumice, fiber fragments and other reasons, lead to silicon spot. In this regard, we adhere to the principle is: with soft front clothing to fully clear water clean, when necessary and soft before final rinsing plus the amount of acetic acid or penetrant (plant oil) to adjust the. After the operation: water machine with silicone oil can not open the steam heating; and soft temperature shall not exceed 60 DEG C (for conventional silicone oil); do not add anionic additives such as anion permeability agent, chelating dispersing agent; try to avoid the further addition of strong electrolyte materials such as salt, soda ash, caustic soda, and so on; silicone oil added to in turn; and soft after discharge when not stop.
There is a judgment of amino silicone oil emulsion is adequately intuitive way: silicone oil dilution 5 to 10 times, standing for 30 min after dilution liquid surface observation, if there is a floating oil or drawing phenomenon, the use of silicone oil carefully.
For silicon spot removal, the effective low cost approach is: silicon spot clothing part to gasoline spraying, after clothing stuffy put in sealed plastic bags or airtight big barrels in. At the bottom of the bag or bucket bottom should have a full of gasoline, stuffy put 20-60 minutes, clothing removal machine fully detergent washing, silicon spot removal effect is ideal, but there is a smell of gasoline residue problem, can be emulsified type detergent thoroughly washed to remove can also be cover the flavor and taste. In addition, if it is containing polyester fiber fabric and without the whole iron, can use alcohol soak, 20-24 hours after cleaning method, this method for polyester damage is minimal. The cotton fabric was not hot and can be used for soaking.. Because of the problem of time, the effect of other solvents is not evaluated, and it is to be treated..

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."