Production and application properties of methyl silicone oil-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > Production and application properties of methyl silicone oil

Production and application properties of methyl silicone oil

Methyl silicone oil is the first commercial use of silicone polymer. Because of its excellent anti - oxidation, anti - shear, low surface tension, hydrophobic, foam, etc., and is widely used in electrical, mechanical, coatings, medical and other departments of the national economy.
In the process of production of methyl silicone oil, the catalyst is decomposed to produce gas with pungent smell, which is partially miscible in the system, which makes the silicone oil smell, and the application is limited. Therefore, the methyl silicone oil production process should try to eliminate the smell.
Methyl silicone oil production process in a reaction kettle, the whole production process including the copolymerization reaction process, the process of pumping low boiling water, heat preservation process and finished pumping gas cooling process, etc. have low boiling gas generation, through the condenser (circulating water, condensation temperature for normal temperature), the non condensing gas lead to active carbon absorption device after the 15m exhaust gas.
Different viscosity of methyl silicone oil will produce each other, due to the low viscosity of the low viscosity of silicon oil, the mixed with the methyl silicone oil can be reduced. Methyl silicone oil chemical performance is relatively stable, but at high temperature with strong acid, strong alkali and metal aluminum, tin and other contact, the viscosity will change.
The experimental results show that the method of controlling the temperature and the temperature between 140 and 120 is the following, which can be obtained from the dry air bubbling method, which can be used to obtain the methyl silicone oil with no smell and no smell, and the average conversion rate is increased from 65% to 80%.

分享到

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."