Effect of silicone intermediate and its dosage on the properties of modified resin-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > Effect of silicone intermediate and its dosage on the properties of modified resin

Effect of silicone intermediate and its dosage on the properties of modified resin

The half-life of phenyl and methyl group is longer, and the substituted silicone intermediate has good weather resistance. Silicone intermediates of large dosage, weather resistance, light and good anti - powder properties. General choice of dosage is 30% - 50% phenyl or methyl silicone intermediates, less than 30% modified alkyd resin performance change is not obvious, more than 50% is film is too soft and too high a cost.
When the content of silicone modified resin was higher, the conversion rate was lower. When the modified compound is placed, the organic silicon content is 60%, which is not due to the 3 month storage, which is caused by the poor compatibility of the hydroxyl groups. And the organic silicon content of 40% or 30% of the modified mixture even for six months is still very stable.
The modified resin was prepared from the modified alkyd resin and the cold mixed resin. Although the modified film adhesion (circle method), and heat resistance, hardness and impact strength

分享到

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."