Metal removal agent for liquid-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > Metal removal agent for liquid

Metal removal agent for liquid

In the aqueous metal processing liquid, the foam is often caused by the use of the emulsifier and other surfactants which are oxidized by the epoxidation.. Usually, there are three kinds of systems for metal processing liquid in the metal processing liquid.:
1, there is oil system
2, silicone oil system
3. Organic modified silicone system
The metal processing liquid of the oil system is used as the high consistency of the corresponding organic particles in the dispersing system and the corresponding organic particles.. However, due to its high surface tension, the efficiency of these products is only moderate.. In contrast, the surface energy of the metal processing liquid in the silicon system can be very low, so the efficiency is high, but its disadvantage is the incompatibility of organic matter in the polymer dispersion.. Organically modified siloxane matrix of liquid metal processing with defoaming agent, due to its organic structure unit, with special advantages, on the one hand than the silicone oil is much higher with the organic polymer compatibility, and on the other hand, because of the siloxane backbones the defoaming efficiency is very high.
Have special effect.
Anti foaming agent containing special modified polyether and containing fluorine materials through special process complex and easily soluble in water, especially suitable for high temperature, strong acid and alkali, high shear strength, under the conditions of high pressure, continued to maintain the defoaming and foam. Has the excellent high temperature resistance, acid and alkali, not floating, not bleach oil; can be widely used in the wide temperature range of the foam elimination and suppression of various harsh systems. Is a comprehensive performance of the fine foam agent, the main has the following six fine performance
1. The basic properties of the foaming system are not affected by the strong consumption of the bubbles and the foam, the dosage is little..
2. Good diffusion and good penetration, and can be completely compatible with oil and cutting fluids.
3, good heat resistance, chemical stability, no corrosion, no toxic, no adverse effects, non flammable, not explosive.
In 4, acid and alkali, salt, electrolyte and hard water can be used.
5, its performance can be comparable with the imported products, while the price has a clear advantage.
6, excellent bubble elimination and bubble suppression, the effect of the bubble is similar to the metal cutting liquid 3-5 times with the product of the bubble agent.

分享到

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."