How to oiling sewing thread-Iota

Products

News

Office Address:	Sunmoon Science Park, 985 Xingzhong Road, High-Tech Zone, Bengbu, China
Factory Address:	Mohekou Industrial Park, Huaishang District, Bengbu, Anhui, China
Contact:	Nathan Zhang
Phone:	0086-552-19805521900
FAX:	0086-552-3822922
Mobile:	19805521900/18119733779
WebSite:	www.siliconeoil.cn www.siliconeoil.net
Email:
QQ:	729118868

News > Dynamic industry > How to oiling sewing thread

How to oiling sewing thread

Sewing thread of oil is generally divided into two types, one is impregnation method, another is the contact method.
In the impregnation method, the lubricant can be selected including: amino silicone oil emulsion, hydroxyl silicone oil emulsion, silicone wax emulsion, etc.. In the contact method, the lubricant can be selected including: mineral oil, two methyl silicone oil and (anhydrous) silicone wax emulsion, etc.. Product performance is followed by low to high.
So, contact law, why it is generally considered that silicone wax class of lubricant is the best sewing thread lubricant? In principle, silicone wax can stay longer in the surface of the sewing line. Because the structure of sewing thread is loose, then gave the sewing thread of oil, oil is easy to penetrate into the internal line to. If the oil is inside the line, where will the sewing thread have good lubrication? Therefore, before silicone wax does not appear, wire manufacturers to ensure the lubrication performance of the line through the way of improving oil rate. So, the problem comes: first of all, there is no doubt that the cost has been raised. In addition, the oil on the line is more, the line of the workload of the clean is large.
And silicon wax products, because it is a mixture of silicone and wax. Although silicone oil can easily penetrate into the interior of the line, wax can remain as a solid surface.. As a good lubricating product, wax can be compounded into the composition of antistatic agent and softening agent in the lubricant of silicone wax.. As a result, not only can provide good lubrication, other nature of the sewing line can also greatly improve!
Since wax is so good, can we use wax directly? The reason is simply that the wax can not heat high temperature! In high-speed sewing, broken sewing machine needle temperature will be very high, and in such a high temperature, the wax would carbonization coking and Coke will block the pinhole, broken suspension. While silicon is heat resistant and has a clean effect. When the wax is in the pin hole, the silicon can take away the wax and keep the pinhole open.. Therefore, the mixture of silicone wax can meet the demand of high speed sewing..

分享到

Feedback to "Iota Silicone Oil (Anhui) Co., Ltd."